humimeter GF2 Set for builders, building surveyors and renovators
Applications and Features
The humimeter GF2 building moisture meter in this configuration makes the tasks and everyday work of a master builder quite easy. Determine the water content in floor screed without a costly CM measurement or determine the moisture in insulating materials and brickwork. Estimate the drying cycle or the drying process. Check if your plaster, wood or parquet have already reached the right water content. Furthermore you are able to measure the air humidity or the surface temperature with an infrared sensor.
- Resolution: 0.1% water content
- Measuring range air humidity 0-100 % r.h.
- Automatic temperature compensation
- Infrared temperature measurement -25 to +125°C / -13 to 257°F
- Measuring area of infrared sensor: 16 cm diameter at a distance of 1 meter
- Non-destructive water content determination of floor screed without CM measuring
- Selectable according to individual requirements
There are other configurations for the humimeter GF2 building moisture meter which can be viewed here.
humimeter GF2 building moisture meter product package contains the following sensor systems.
Picture | Sensor typ | Application |
![]() | attached conductance electronics for GF2 pluggable electronics box with 1 meter cable for connecting external conductivity sensors with BNC connector | Necessary adapter for the connection of all sensor types based on the measuring method of conductance with the humimeter GF2.
|
![]() | GF2 pair of plug-in electrodes article no. 13011 | Measuring plaster to evaluate the approval for subsequent works (tiling, paperhanging, paintwork) in new buildings resp. after water damages. |
![]() | GF2 pair of flat electrodes
| Condensation and water damages in insulation material, residual moisture measurement in impact sound insulation below the floor screed after water damages. Essential depth measurement of ascending moisture, especially for exsiccation processes after water damages deep in the brickworks. Checking the drying of fill in deep layers, especially in case of an unequal fill and consequentially resulting floor unevenness. |
![]() | pluggable rel. humidity sensor air humidity 0..100% temperature: -10..+60°C article no. 12514 | Connection of an external air humidity and temperature sensor. Via measuring the rel. humidity the appearance of mould can be prevented. At climatic conditions of more than 65% r.h. there may arise mould spores on damp areas. The measuring data can automatically be saved in adjustable intervals. |
![]() | pluggable IR temperature sensor temperature: -25..125°C 1:10 optics article no. 12513 | Connection of an external infrared temperature sensor. This sensor is equipped with 1:10 optics. This equates a measuring area of 16cm diameter at a distance of 1 meter. With this sensor you can easily detect areas of weak insulation in the wall. Also the functioning of the underfloor heating can be controlled. |
![]() | rticle no. 12512 | Plastic case for humimeter GE1 und GF2 - Dimensions: 340 x 275 x 83 mm |
(All sensor probes could be cancelled or additionally ordered if necessary.)
Your benefits:
- Measurement within seconds without prior treatment of samples
- Hold function, manual saving of results, datalog for 10.000 logs with measuring point report
- Dimensions 147 x 75 x 30 mm, weight 265g (incl. batteries)
- Large, well-lit LC display
- PC software for data archiving and graphic display of climate data
- No expensive CM measuring necessary
Request and consultation
humimeter GF2
professional building moisture meter
for master builder
Interested in this product? Our specialists will be happy to give comprehensive and free advice on product features and technical solutions. Send your inquiry or just call us on:
+43 3178 28899