Professional building moisture meter for building surveyors
humimeter GF2 Building moisture meter for building surveyors
Applications and Features
The humimeter GF2 building moisture meter in this configuration makes the tasks and everyday work of a building surveyors quite easy. Determine the water content in floor screed without a costly CM measurement or determine the moisture in insulating materials and brickwork. Estimate the drying cycle or the drying process. Check if your plaster, wood or parquet have already reached the right water content. Furthermore you are able to measure the air humidity or the surface temperature with an infrared sensor. If the air quality is necessary for your work you can determine the CO2 content easily with the pluggable CO2 sensor.
Resolution: 0.1% water content
Measuring range air humidity 0-100 % r.h.
Automatic temperature compensation
Infrared temperature measurement -25 to +125°C / -13 to 257°F
Measuring area of infrared sensor: 16 cm diameter at a distance of 1 meter
The humimeter GF2 building moisture meter product package for building surveyors contains the following sensor systems:
round measuring plate, fix mounted
article no. 13140
Building moisture meter with diverse calibration curves for building materials. Choose the correct calibration curve using the arrow keys and press the device onto the material. It is obligatory that the measuring instrument rests on an even and cleaned measuring area.
attached conductance electronics for GF2 pluggable electronics box with 1 meter cable for connecting external conductivity sensors with BNC connector
article no. 13141
Necessary adapter for the connection of all sensor types based on the measuring method of conductance with the humimeter GF2.
GF2 hand electrode
article no. 12847
Measuring plaster to evaluate the approval for subsequent works (tiling, paperhanging, paintwork) in new buildings resp. after water damages.
Checking adequate drying of wood, parquet and so on in order to prevent the formation of shrinkage tears in wooden floors because of a further drying of the wood.
GF2 ram electrode
article no. 12630
Checking adequate drying of wood, parquet and so on in order to prevent the formation of shrinkage tears in wooden floors because of a further drying of the wood with the building moisture meter humimeter GF2.
GF2 pair of plug-in electrodes
article no. 13011
Measuring plaster to evaluate the approval for subsequent works (tiling, paperhanging, paintwork) in new buildings resp. after water damages with the building moisture meter humimeter GF2.
GF2 pair of flat electrodes
article no. 13012
Condensation and water damages in insulation material, residual moisture measurement in impact sound insulation below the floor screed after water damages.
Essential depth measurement of ascending moisture, especially for exsiccation processes after water damages deep in the brickworks. Checking the drying of fill in deep layers, especially in case of an unequal fill and consequentially resulting floor unevenness.
pluggable rel. humidity sensor air humidity 0..100% temperature: -10..+60°C
article no. 12514
Connection of an external air humidity and temperature sensor. Via measuring the rel. humidity the appearance of mould can be prevented. At climatic conditions of more than 65% r.h. there may arise mould spores on damp areas. The measuring data can automatically be saved in adjustable intervals.
pluggable r.h. sensor with 2m connecting cable: air humidity 0..100% temperature: -10..+60°C
article no. 12032
In addition to the points above, this sensor offers a 2m connection cable. This enables a measurement also in far-off areas. Additionally, the sensor can be mounted stationary and only be connected to the device if required.
In addition to both above described applications, with this sensor also the relative humidity and the temperature in the brickwork can be measured. The sensor is equipped with a stainless sensor tube that can problem-free be used also in brickwork, concrete and floor screed.
pluggable CO2 sensor: CO2 range 0..5000ppm (+/- 50ppm +3%)
article no. 12964
Connection of an external CO2 sensor. This sensor shows the concentration of CO2 up to a maximum of 5000ppm (parts per million). At measuring values below than 800 ppm the ambient air quality is considered as good, values between 800 and 1400 ppm reveal a medium to moderate ambient air quality.
pluggable IR temperature sensor: temperature: -25..125°C 1:10 optics
article no. 12513
Connection of an external infrared temperature sensor. This sensor is equipped with 1:10 optics. This equates a measuring area of 16cm diameter at a distance of 1 meter. With this sensor you can easily detect areas of weak insulation in the wall. Also the functioning of the underfloor heating can be controlled.
(All sensor probes could be cancelled or additionally ordered if necessary.)
Measurement within seconds without prior treatment of samples
Hold function, manual saving of results, datalog for 10.000 logs with measuring point report
Dimensions 147 x 75 x 30 mm, weight 265g (incl. batteries)
Large, well-lit LC display
PC software for data archiving and graphic display of climate data
Universal building moisture meter
humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC
Plastic case for humimeter GF2
Set of 20 replacement tips for measuring electrodes, without isulation 40mm long
Set of 20 replacement tips for measuring electrodes, without isulation 60mm long
Set of 2 replacement tips for measuring electrodes, isulated, 60mm long
Set of measuring bushes for floor screed: Plastic bush for driving in a bore hole of a diam eter of 12mm. 20 bushes incl. plug and one hammering aid Suitable for humidity and temperature sensor (Art. No. 13159)
Integrated sensor for parquet floor GF Measurement of relative humidity and temperature
Cabel for integrated sensor for parquet floor GF for connection of the integrated sensor for parquet floor GF (art. no. 13066) to a humimeter device, cable length 2 meters
BNC connecting cable ∅4mm, 100cm Länge (spare part)
Extension cable of 8 meters length for humimeter RH2 and GF sensors
Wall holder / anti-theft protection for GF2
Request and consultation
humimeter GF2 professional building moisture meter for building surveyors
Interested in this product? Our specialists will be happy to give comprehensive and free advice on product features and technical solutions. Send your inquiry or just call us on: +43 3178 28899