humimeter RP6
Moisture meter for Recycling paper

humimeter RP5 Recycling paper moisture meter - Suitable for the measurement of pressed piles, roles and pulp.

humimeter RP6 moisture meter
for recycling paper

 

 

Applications:

Moisture meter for the determination of moisture in recycling paper and for the detection of moisture spots in recycling paper bales.

Measurement of compressed bales, roles and pulp possible. Measuring range of 1 to 50% water content, measuring depth 500mm. Furthermore it is possible to connect the humimeter RP6 with a humidity and temperature sensor in order to measure environmental parameters and many other important paper key figures quickly and efficiently.

Features:

humimeter RP6 Moisture meter for the determination of moisture in recycling paper and for the detection of moisture spots in recycling paper bales.
  • Measuring range: 1 to 50% water content (depending on the material)
  • Resolution: 0.5% water content
  • Measuring depth: max. 500mm
  • Operation temperature: 0 to +50°C / 32 to 122°F
  • Automatic temperature compensation
  • Temperature can be set to °C und °F as required
  • Measurement within seconds without prior treatment of samples
  • Hold function, automatic datalog for up to 10,000 logs with measuring point report
  • Interface for the connection of further external sensors
  • Menu languages: English, German, Italian, French, Spanish, Russian, many others on request
  • Protection class: IP64
  • Scope of supply: humimeter RP6, humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC, rechargeable batteries (Li-Ion 1950mAh) and plastic case
  • Optional: portable thermo printer,  humidity and temperature sensor, test medium

Your benefits:

  • Quickly and highly accurate measurement using a non-destructive method
  • Simple handling of moisture meter
  • Handy, applicable everywhere on site
  • Menu languages: English, German, Italian, French, Spanish, Russian and many others on request

Art.Nr.: 13300 humimeter RP6 moisture meter  for recycling paper

Extended accessories

Art. No.PictureExtended accessories
11733Thermo printer runs by battery, industrial model, portable Thermo printer runs by battery, industrial model, portable
12627Bluetooth data communication moduleBluetooth data communication module for all humimeter devices with serial interface RS232 and USB interface
12004LF_TB 120 Precision moisture and temperature stapping sensor for material moisture,LF_TB 120 Precision moisture and temperature stapping sensor for material moisture, sensor head 0,3m stainless tube with steel sinter cap and 2 meter connection cable Powered by RH2 relative humidity 0 bis 100%, calibration 0 to 90% relative humidity (at 25°C), temperature range -20 to +120°C, calibration +/- 0,5°C (at 25°C), rapid conditioning
10726Test medium for humimeter RP6 moisture meter for recycling paper
10600Factory calibration certificate Protocol documenting the adjustment at delivery of material moisture meters

Measuring procedure:

Start your humimeter RP6 by pushing the black button on the handle of the device. Choose the right calibration curve (e.g. 350 recycling paper) and press the measuring plate against the recycling paper bale. The display immediately shows the water content and temperature.  Now additional information like supplier’s data and notes can be added. The measuring values can be stored at the humimeter RP6 and send to a PC if required.

Furthermore the measuring results can be printed out on the spot via the optionally available portable thermo printer. For the determination of many other relevant process parameters, a humidity and temperature sensor can be connected.

Request and consultation

humimeter RP6
Moisture meter for recycling paper

Interested in this product? Our specialists will be happy to give comprehensive and free advice on product features and technical solutions. Send your inquiry or just call us on:

+43 3178 28899

Send request