Humimeter GF2 Building Moisture Meter

Humimeter GF2 - Professional building moisture meter

humimeter GF2
Professional building moisture meter

 

 

Applications

The Humimeter GF2 building moisture meter is a professional and versatile building moisture meter which can be extended with various sensors to match your individual needs. As the GF2 offers such a wide variety of functions we recommend some well proven configurations for popular tasks in the building industry (see Recommended configurations). Especially notable is the blazingly fast nondestructive measurement of floor screed without using the tedious CM method.

The GF2 building moisture meter is able to perform lots of measurements relevant for the building industry including: building moisture, air humidity, indoor climate, dew point, equilibrium moisture content, air and surface temperature as well as long-term recording of climate data, incl. material moisture sensor. Optionally available external air humidity and infrared temperature sensors, PC software for data archiving and graphic display of climate data.

PDF-brochure GF2 building moisture meter

Price request GF2 building moisture meter

Features

Professional building moisture meter
  • Measuring range building moisture: dependent on the material
  • Resolution: 0.1% water content
  • Measuring range air humidity 0-100 % r.h.
  • Infrared temperature measurement -25 to +125°C / -13 to 257°F
  • Measuring area of infrared sensor: 16 cm diameter at a distance of 1 meter
  • Measurement of CO2 up to 5000ppm
  • Temperature can be set to °C or °F as required
  • Automatic temperature compensation
  • Measurement within seconds without prior treatment of samples
  • Hold function, manual saving of results, datalog for 10.000 logs with measuring point report
  • Large, well-lit LC display
  • Scope of supply: humimeter GF2 building moisture meter with batteries
  • Dimensions 147 x 75 x 30 mm, weight 265g (incl. batteries)
  • Required accessories: measuring probes, selectable according to individual requirements

Art. No.: 13140 Humimeter GF2 professional building moisture meter

Recommended configurations

We recommend the following well established configurations for the GF2 building moisture meter. While we recommend these configurations note that one GF2 can be extended with all offered sensors and therefore you can choose which functionality your device should support. This versatility makes our building moisture meter the perfect device for the building industry - and if you discover that you need more functionality, simply order the corresponding sensors!

Art. No.Configurations for craftsmen
13739

Sensor package for caretakers, for connection to humimeter GF2:

+ 13141: Conductance electronics
+ 12847: hand electrode for measurement of wood and plaster
+ 12514: Air humidity and temperature sensor 0..100%
+ 12964: CO2 sensor up to 5000ppm
+ 12513: Non-contact infrared temperature sensor measurement -25 to +125°C
+ 12512: GF2 plastic case,  dimensions 340 x 275 x 83 mm

-> all further available sensors can be added subsequently!

13743

Sensor package for painters, for connection to humimeter GF2:

+ 13141: Conductance electronics
+ 12847: hand electrode for measurement of wood and plaster
+ 12514: Air humidity and temperature sensor 0..100%
+ 12512: GF2 plastic case,  dimensions 340 x 275 x 83 mm

-> all further available sensors can be added subsequently!

13744

Sensor package for building surveyors, for connection to humimeter GF2:

+ 13141: Conductance electronics
+ 12847: hand electrode for measurement of wood and plaster
+ 13011: GF2 Pair of plug-in electrodes
+ 13012: GF2 Pair of flat electrodes, 300 mm length
+ 12514: Air humidity and temperature sensor 0..100%
+ 12513: Non-contact infrared temperature sensor measurement -25 to +125°C
+ 12964: CO2 sensor up to 5000ppm
+ 11929: GF2 plastic case,  dimensions 450 x 360 x 106 mm

-> all further available sensors can be added subsequently!

13745

Sensor package for restoration and dehumidification, for connection to humimeter GF2:

+ 13141: Conductance electronics
+ 12847: hand electrode for measurement of wood and plaster
+ 13011: GF2 Pair of plug-in electrodes
+ 13012: GF2 Pair of flat electrodes, 300 mm length
+ 12514: Air humidity and temperature sensor 0..100%
+ 12513: Non-contact infrared temperature sensor measurement -25 to +125°C
+ 11929: GF2 plastic case,  dimensions 450 x 360 x 106 mm

-> all further available sensors can be added subsequently!

13746

Sensor package for bottomers, for connection to humimeter GF2:

+ 13141: Conductance electronics
+ 12847: hand electrode for measurement of wood and plaster
+ 12514: Air humidity and temperature sensor 0..100%
+ 12512: GF2 plastic case,  dimensions 340 x 275 x 83 mm

-> all further available sensors can be added subsequently!

13747Sensor package for master builders, for connection to humimeter GF2:

+ 13141: Conductance electronics
+ 12847: hand electrode for measurement of wood and plaster
+ 13011: GF2 Pair of plug-in electrodes
+ 13012: GF2 Pair of flat electrodes, 300 mm length
+ 12514: Air humidity and temperature sensor 0..100%
+ 12513: Non-contact infrared temperature sensor measurement -25 to +125°C
+ 11929: GF2 plastic case,  dimensions 450 x 360 x 106 mm

-> all further available sensors can be added subsequently!
13748

Sensor package for carpenters, for connection to humimeter GF2:

+ 13141: Conductance electronics
+ 12847: hand electrode for measurement of wood and plaster
+ 12514: Air humidity and temperature sensor 0..100%
+ 11929: GF2 plastic case,  dimensions 450 x 360 x 106 mm

-> all further available sensors can be added subsequently!

Extended accessories

Art. No.PictureExtended Accessories
12278humimeter USB data interface module with LogMemorizer measuring data recording and analysing software

humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC

12514Air humidity and temperature sensorAir humidity and temperature sensor for humimeter GF2 building moisture meter
12032Humidity and temperature sensor with 2 meters connection cableHumidity and temperature sensor with 2 meters connection cable
12004LF_TB 120 Precision humidity and temperature plug-in sensor

LF_TB 120 Precision humidity and temperature plug-in sensor for material moisture

Sensor head 0.3 m stainles tube with steel sinter cap and 2 meters connecting calble

13224Extension cable of 3 meters length for humimeter RH2 and GF sensorsExtension cable of 3 meters length for humimeter RH2 and GF sensors
13066Integrated sensor for parquet floor GF Measurement of relative humidity and temperatureIntegrated sensor for parquet floor GF Measurement of relative humidity and temperature
12857Cabel for integrated sensor for parquet floor GF for connection of the integrated sensor for parquet floor GF

Cabel for integrated sensor for parquet floor GF for connection of the integrated sensor for parquet floor GF (art. no. 13066) to a humimeter device, cable length 2 meters

13159Humidity and temperature sensor with ∅ 8mm plastic sensor tube

Humidity and temperature sensor with ∅ 8mm plastic sensor tube. Powered by RH2 resp. GF2, with 2 meters sensor cable, Suitable for measuring bush for floor screed (Art. No. 13160)

13160Set of measuring bushes for floor screed

Set of measuring bushes for floor screed

Plastic bush for driving in a bore hole of a diam eter of 12mm. 20 bushes incl. plug and one hammering aid Suitable for humidity and temperature sensor (Art. No. 13159)

12513Non-contact infrared temperature sensor for humimeter GF2

Non-contact infrared temperature sensor for humimeter GF2

IR- temperature measurement -25 to +125°C / -13 to 257°F. Measuring area: ∅ 16cm at a distance of 1 meter

12964CO2 Sensor for humimeter GF2

CO2 Sensor for humimeter GF2

Measuring range: 0 to 5000 ppm

accuracy (at 25°C and 1013 mbar): < +/- 50 ppm +3% of measuring value

operating temperature -10 to +60 °C

Measuring intervall: approx.. 10 sec, dimensions ∅28x108mm

13141 plugable electronics box with 1 meter cable for connecting external conductivity sensors with BNC connector incl. connecting cableExternal conduct electronics for GF2

plugable electronics box with 1 meter cable for connecting external conductivity sensors with BNC connector incl. connecting cable (Art. No. 12881)

12847humimeter hand electrode with

humimeter hand electrode with

10 replacement tips 16mm and

10 Ersatzspitzen 23mm. For connection to humimeter GF2 Art. No. 13141 is required!

13011Pair of plug-in electrodes

Pair of plug-in electrodes

For determining of water content of hardened and set building materials. With 10 measuring tips of each 40 and 60mm length. For connection to humimeter GF2 Art. No. 13141 is required!

13012Pair of flat electrodes, 300mm length

Pair of flat electrodes, 300mm length

For determination of water content in floor screed resp. insulation, especialy in boarder and floating joints. For connection to humimeter GF2 Art. No. 13141 is required!

12881BNC connecting cable ∅4mm, 100cm Länge (spare part)
12630humimeter WLW Hammer (ram electrode) with BNC cablehumimeter WLW Hammer (ram electrode) with BNC cable, without measuring tips. For connection to humimeter GF2 Art. No. 13141 is required!
12146Set of 20 replacement tips for measuring electrodes, without isulation 40mm longSet of 20 replacement tips for measuring electrodes, without isulation 40mm long
11775Set of 20 replacement tips for measuring electrodes, without isulation 60mm longSet of 20 replacement tips for measuring electrodes, without isulation 60mm long
11482Set of 2 replacement tips for measuring electrodes, isulated, 60mm longSet of 2 replacement tips for measuring electrodes, isulated, 60mm long
12512Plastic case for humimeter GF2Plastic case for humimeter GF2
11929Plastic case for humimeter BLW, WLW, BL2 and GF2
13051Wall holder / anti-theft protection for GF2

Request and consultation

humimeter GF2 Building moisture meter

Interested in this product? Our specialists will be happy to give comprehensive and free advice on product features and technical solutions. Send your inquiry or just call us on

+43 3178 28899

Send request